Repository navigation
Add Elecrow CrowPanel 2.13 EPaper - #11817
Merged
dhalbert merged 1 commit intoNov 10, 2026
Merged
Conversation
Creation ID 0x00000003 under Elecrow (creationid/creators#99). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dhalbert
approved these changes
Nov 10, 2026
dhalbert
left a comment
Collaborator
There was a problem hiding this comment.
Thanks! Now circuitpython.org needs a PR to add the board: https://learn.adafruit.com/how-to-add-a-new-board-to-the-circuitpython-org-website
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Adds Elecrow's CrowPanel ESP32 2.13" E-Paper HMI display
(https://github.com/Elecrow-RD/CrowPanel-ESP32-2.13-E-paper-HMI-Display-with-122-250): ESP32-S3 with 8 MB octal
PSRAM, 8 MB quad flash (W25Q64JV), a 250x122 black-and-white e-paper panel, a CH340K USB-serial converter (no native
USB), BOOT and RESET, MENU and EXIT, a three-way rocker wheel, a red LED, a two-pin GPIO header and a battery socket with
a charger. It's laid out like
elecrow_crowpanel_4_2_epaper, which the definition follows.0x00000003under Elecrow's creator ID (Add Elecrow CrowPanel 2.13 EPaper creation ID creationid/creators#99). No USB, so no PID; the console isUART0 on GPIO43/44 through the CH340K, as on the 4.2".
BUTTON_BOOT0,BUTTON_EXIT1,BUTTON_MENU2,ROCKER_DOWN4,ROCKER_CLICK5,ROCKER_UP6,LED19,EPD_ENABLE7 (high powers the panel),EPD_BUSY9,EPD_RES10,EPD_MOSI11,EPD_CLK12,EPD_DC13,EPD_CS14, headerIO40/IO41,TX/RX43/44, and
board.EPD_SPI().MICROPY_HW_LED_STATUS), as the 4.2" uses its LED.board.DISPLAY. This panel loads its waveforms from software and needs the 0x22/0x23 registers swappedon every refresh, or the glass doesn't change.
EPaperDisplayreplays fixed sequences, so it can't drive it. Programsdrive the panel over
board.EPD_SPI(). I'm glad to add a display if there's a way to express the swap.How I tested it (my own board, panel V1.2):
elecrow_crowpanel_2_13_epaper, 8 MB PSRAM and a 6.2 MB filesystem. Web workflow joins WiFi, and its/cp/version.jsonreportscreator_id0x1C350000 andcreation_id3. IO40 and IO41 follow a pull-up and apull-down.
EPD_SPI, with deep sleep between uses, woken by the wheel (all three directions),MENU or EXIT.
pre-commitpasses on the five files, andci_check_duplicate_usb_vid_pid.pyfinds no duplicates.🤖 Generated with Claude Code